how to change scale in dimension catalystex

A value between 0.2-0.4mm is usually sufficient.

If you are having trouble removing your support material, you may want to increase this setting so that there is a larger gap between the support and the part. The horizontal offset will determine how much spacing there is between the support structures and the outline of your part. The Separation from Part section includes all of the settings that determine how easily the support material will break away from your final solid part. If you do not need to manually edit the support structures for your model, you can simply configure these settings appropriately and let the software automatically generate the support structures without needing to open the Customize Support Structures window like we did previously. Notice that the Automatic Placement section includes the exact same options that were found in the support generation toolbar. A larger resolution also makes the pillars easier to interact with.Ĭlick on the Support tab to see the various settings that control how your support material is printed. In this case, the features are all large and pronounced, so a resolution between 4-6mm should be fine. If you have a very complex model with lots of tiny features, you might want to use a smaller value like 1-2mm. The only other option in this section is the support pillar resolution, which determines the size of each individual support pillar.

The actual print will still use the same back-and-forth webbing pattern that you saw earlier in the G-Code preview. Note that the pillar shape is simply a preview. This preview shows a series of vertical pillars that represent where support structures would be needed. This will produce a preview of the recommended support structures based on the overhang angle that you specify. Once you select an option, press the Generate Automatic Supports button. You can also change the Support Type from Normal to From Build Platform Only, which will only generate supports that are touching the build plate, which can be useful if the supports generated will be trapped within the part or otherwise difficult to remove. This can save a lot of time by giving you a starting point for any later modifications. The top section contains all of the automatic support generation options that allow the software to give you a recommendation about where it thinks support material is needed. The support generation toolbar consists of several sections.

How to change scale in dimension catalystex